View unanswered posts | View active topics It is currently Tue Nov 21, 2017 10:46 pm



Reply to topic  [ 1 post ] 
 GSuite G-code PCB and coil winder tools 
Author Message

Joined: Sun Aug 26, 2012 2:08 pm
Posts: 1048
Location: Lacey, WA USA
I found out about this because of one of the tools meant for driving coil winders, Gcoil.

https://youtu.be/YpKh2FpJPKs

Quote:
Gsuite is a set of free gcode tools, mostly for PCB engraving. The source is provided with no license. Use it as you wish.


http://www.mycncuk.com/threads/1372-Gsuite-V1-2-free-gcode-tools

Unfortunately, the last dev on this was in 2012, and it is difficult to search for more information because Google has software called G Suite, and some company making vaping supplies calls their heater coils "G Coil".

Because I'm concerned the files may go away at any time, I've attached them here. V1.2, 1.3, and 1.4. The last two include GCoil.

Quote:
Gflat v1.0 – Creates a milling pattern to flat the bed of the milling machine. It can generate both a conventional milling or climb milling path.

Gopt 1.0 – Optimizes both drilling and milling paths. Tool changes are supported as well. This program is completely new and has different logic then existing optimization programs.

Gpath v1.1– Removes close parallel tracks. This leaves only one track to be milled between pads which increases track quality. Handy for engraving fine pitch SMD IC's.

Gskew v1.2– Compensates for skew or un-squareness in the milling machine. With some tweaking, the drill holes in the via's and pads can be aligned exactly. Handy for double sided PCB's.

Gtime v1.1– Calculates the time it takes to finish the milling job. No more surprises. The job time is accurate to within about 10 minutes for large boards.

Gcoil enables you to use your normal CNC milling machine as a coil winder.


Attachments:
File comment: Gsuite 1.4 (with Gcoil)
Gsuite_v1.4.rar [1.93 MiB]
Downloaded 19 times
File comment: Gsuite 1.3 (with Gcoil)
Gsuite_v1.3.rar [1.92 MiB]
Downloaded 22 times
File comment: GSuite 1.2 (no Gcoil)
Gsuite_v1.2.rar [1.83 MiB]
Downloaded 18 times

_________________
Steve Greenfield AE7HD
Fri Mar 10, 2017 3:17 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software